About Us

Entreat Technologies is an ISO 9001:2015 certified Eco-friendly Company aiming to instill the habit of Reduce, Reuse and Recycle to preserve the environment from further pollution and to restore it to its enriched state. We are committed to provide prompt, custom-made, reliable and quality based solutions to our clients and render best after sales support.

We are based in Trichy to serve all water and waste water treatment needs. We design, engineer and install water treatment systems like RO Plants, Water Softeners, Iron Removal Plants, Demineralization (DM) Plants, Micro Filtration (MF) Systems, Ultra Filtration (UF) Systems, Nano Filtration (NF) Systems etc. We do design, engineering, erection and commissioning of waste water treatment systems like Sewage Treatment Plants (STP), Effluent Treatment Plants (ETP) and Zero Liquid Discharge (ZLD) Plants.

Vision

‘To restore the quality of environment using our excellence.’

Mission

‘Towards our passionate goal of conserving the environment by providing technically efficient and cost effective solutions in water and waste water treatment sector through our well defined values, positive culture and a competent team to serve our clients across boundaries.’

Quality Policy

We are committed to demonstrate quality in every footprint of our Company by

  • Focusing on customer delight by rendering prompt, reliable and custom-made services.
  • Ensuring real value for money by carefully examining clients’ requirements and providing suitable solutions.
  • Focusing on continual improvement of services through innovation, compliance of standards and efficiency of business process.

SUPPLIES & SERVICES

We supply all sorts of water and waste water treatment systems and also undertake turnkey projects. We supply all spares and chemicals related to RO Plants, Water Softeners, Sewage Treatment Plants (STP), Effluent Treatment Plants (ETP) etc.

Services Rendered

Annual Maintenance Contracts (AMC)

We undertake Annual Maintenance Contracts of Water and Waste Water Treatment Systems like RO Plants, Sewage Treatment Plants (STP), Effluent Treatment Plants (ETP) etc. during which we inspect the plants on a regular basis and provide suitable recommendations to ensure consistent performance of the plants.>

Operation and Maintenance (O&M)

We undertake Operation and Maintenance of Sewage Treatment Plants (STP) and Effluent Treatment Plants (ETP) during which we employ our technically trained employees at the plant to ensure proper operation and maintenance of the plants as per the Standard Operating Procedure (SOP).

Troubleshooting

We analyze and solve any problem related to water and waste water treatment.

Revamping

We undertake revamping of Water and Waste Water Treatment Systems like RO Plants, Sewage Treatment Plants (STP), Effluent Treatment Plants (ETP) etc. during which the existing plants are examined and redesigned in order to enhance their efficiency.

Retrofitting

We undertake retrofitting of Water and Waste Water Treatment Systems like RO Plants, Sewage Treatment Plants (STP), Effluent Treatment Plants (ETP) etc. during which the existing plants are examined and new features and technologies are added to enhance their efficiency and operation.

Technologies

Activated Sludge Process

Activated Sludge Process

Description

An Activated Sludge Process is a biological treatment process in which highly concentrated microorganisms are used to degrade organics and remove nutrients from waste water. This multi-chamber unit consists of an Aeration tank where air is injected and a Settling tank where the biological flocs are allowed to settle thereby separating the biological sludge from the treated water. The Activated Sludge Systems can treat black water, grey water, faecal sludge and industrial waste water if the pollutants to be treated are biodegradable.

Advantages

  • Resistant to organic and hydraulic shock loads
  • High reduction of BOD and nutrients
  • High effluent quality
EA (Extended Aeration)

EA (Extended Aeration)

Description

Extended Aeration is a modified activated sludge process in which the raw sewage goes straight to the aeration tank for treatment where all the solids are digested by aerobic bacteria. Since the sewage is aerated for a minimum of 24 hours, there is enough time for almost all the solids to be digested completely. EA is particularly suited to plants that have a low concentration of settleable solids in the raw sewage.

Advantages

  • Effective removal of Biochemical Oxygen Demand (BOD) and Total Suspended Solids (TSS)
  • Minimal design, operating and maintenance costs
  • Ease of installation and operation
Activated Sludge Process

Sequential Batch Reactor (SBR)

Description

SBR is a varied configuration of the activated sludge systems in which the treatment process takes place in batches. The different treatment conditions are achieved in the same reactor but at different times. The process involves five stages namely Fill, React, Settle, Decant and Idle. The SBR treated effluent can be discharged to surface water or land.

Advantages

  • Less area required
  • Effective removal of BOD, COD and TSS
  • High degree of automation can be done
MBBR (Moving Bed Biofilm Reactor)

MBBR (Moving Bed Biofilm Reactor)

Description

MBBR is a combination of activated sludge process (suspended growth) and biofilter process (attached growth). The process uses the whole tank volume for biomass growth. It uses simple floating media which are carriers for attached growth of biofilms. Biofilm carrier movement is caused by the agitation of air bubbles. This compact treatment system is effective in removal of BOD as well as nitrogen and phosphorus while facilitating effective solids separation.

Advantages

  • Higher effective sludge retention time (SRT) which is favorable for nitrification
  • Responds to load fluctuations without operator intervention
  • Lower sludge production
  • Less area required
MBR (Membrane Bioreactor)

MBR (Membrane Bioreactor)

Description

MBR is the combination of a membrane process (micro filtration or ultra filtration) with a biological wastewater treatment process (activated sludge process). In MBR, the membrane is employed as a discrete tertiary treatment step with no return of the active biomass to the biological process. It is widely used in the treatment of municipal and industrial wastewater.

Advantages

  • Sludge solids are completely retained in the bioreactor and hence solids retention time (SRT) and the hydraulic retention time (HRT) can be controlled separately
  • Treated effluent is of very high clarity and with significantly reduced pathogen concentration
  • Longer solids retention times tend to provide better biotreatment
FBR (Fluidized Bed Reactor)

FBR (Fluidized Bed Reactor)

Description

FBR is a type of reactor device in which multiphase chemical reactions are carried out. In this reactor, fluidization takes place during which a fluid (gas or liquid) is passed through a solid granular material (usually a catalyst possibly shaped as tiny spheres) at high enough velocities to suspend the solid causing it to behave like a fluid. FBR is the most economical treatment choice in industries involving a broad range of influent flow rates and contaminant concentration levels.

Advantages

  • Cost effective method to treat a variety of contaminants
  • Treated effluent is of high quality
  • Effectively handles both hydraulic and organic shock loads

Gallery

Supply of Spares, Equipments & Chemicals

We supply all Spares, Accessories, Materials, Equipments, Consumables and Chemicals allied to Water and Waste Water Treatment Systems like RO Plants, Water Softeners, Sewage Treatment Plants (STP), Effluent Treatment Plants (ETP) etc.

We provide prompt after sales support as we believe it to be an essential part of reliable and consistent service to our clients.

Filters

Filters

Filter Housings

Filter Housings

Membranes for RO, MF, UF, NF

Membranes for RO, MF, UF, NF

Booster Pumps, High Pressure Pumps & Motors

Booster Pumps, High Pressure
Pumps & Motors

Pressure Vessels in FRP, MS & SS

Pressure Vessels in FRP, MS & SS

Blowers

Blowers

MBBR Media

MBBR Media

Tube & Disc type Diffusers

Tube & Disc type Diffusers

Tube Settlers

Tube Settlers

Electrical Panel Boards

Electrical Panel Boards

Water & Waste Water Treatment Chemicals

Water & Waste Water Treatment Chemicals

Filter Media

Filter Media & Resins

Clients

Get in Touch

For Enquiries Contact

ENTREAT TECHNOLOGIES
Operations Off:
Plot No. 11, 7th Cross, Kattabomman Street, Kumaran Nagar,
Trichy – 620017.
Admin Off:
No. 8A/3, North Muthuraja Street, Puthur, Trichy – 620017.
Tamilnadu, India.
Phone: 0431 4973730
Mob: (91) 99528 96948, 94420 67940, 94893 86620
Email: entreattechnologies@gmail.com